Perspectives of solid waste management in rural Cambodia

  • Edward Creaser Australian National University
  • Jeremy Smith Australian National University
  • Andrew Thomson Australian National University
Keywords: Waste Composition, Waste Management, Cambodia

Abstract

We present perspectives of solid waste in the Cambodian community of Koh Dambang, situated on the Mekong River, identified through a field-based mixed-methods study. We found that Koh Dambang had no waste service and households were responsible for their waste management. The residents interviewed produce approximately 0.4 to 1 kg of waste per person per day, where typically half of the waste is burnt, a quarter is buried and the remainder is dumped. Our research highlighted the desire for a community-level waste management plan. Some degree of waste management centralisation would have environmental, health and economic benefits for the residents, where expert consultation on a community-level incinerator or alternative would also be beneficial, although this is embedded in our existing external perspectives of waste management. Further consideration of the views of the whole community and its administration is required before a strategy could be proposed.

Author Biography

Jeremy Smith, Australian National University
Research Engineering / Engineering Education Associate, Research School of Engineering

References

Agamuthu, P, Fauzaih, S, & Zhidzir, KN 2007, ‘Sustainable waste management - Asian perspectives’, Proceedings of the International Conference on Sustainable Solid Waste Management, Chennai, India, pp. 15 - 26.

Boettner, E, Ball, G, & Weiss, B 1973, Combustion products from the incineration of plastic, Washington, cat. no. EPA 670-2-73-049; PB-222 001, U.S. Environmental Protection Agency, National Environmental Research Center, Office of Research and Development.

CINTRI. (2016). CINTRI (Cambodia) LTD. Retrieved September 6, 2016 from http://cintri.com.kh/

EPA 2003, Air Pollution Control Technology Fact Sheet: Thermal Incinerator, United States Environmental Protection Agency.

Glawe, U, Visvanathan, C & Alamgir, M 2004, Solid Waste Management in Least Develop Asian Countries - A Comparative Analysis, Bangaladesh: Asian Institute of Technology, Department of Civil Engineering, Thailand.

Heng, N, & Laptaned, U 2007, ‘Green logistics affecting the involvement of households in recycling and reuse of plastics’, Proceedings of the International Conference on Operations and Supply Chain Management Phnom Penh, Cambodia, pp. 285 - 292.

Hoepfl, M 1997, ‘Choosing qualitative research: a primer for technology education researchers, Journal of Technology Education, vol. 9, no. 1, pp. 1 -10.

Muny, M 2016, Survey Report on Waste Management Practices At Municipality/District Level, The National League of Local Councils

Parizeau, K, Maclauren, V, & Chanthy, L 2006, ‘Waste characterisation as an element of waste management planning: Lessons learned from a study in Siem Reap, Cambodia’, Resources, Conservation and Recycling, vol. 49, no. 2, pp. 110 - 128.

Sethy, S, Sothun, C & Wildblood, R 2014, ‘Municipal solid waste management in Cambodia’, in Municipal Solid Waste Management in Asia and the Pacific Islands Challenges and Strategic Solutions, Pariatamby A & Tanaka, M (eds,), Springer, Singapore

Stauffer B, & Spuhler, D 2016, Incineration (Small-Scale). Sustainable Sanitation and Water Management (SSWM).

Vanda, K & Heilmann, D 2015, Waste Management Challenges in Cambodia and Experiences from other countries, Parliamentary Institute of Cambodia

World Bank 2004, Vietnam Environment Monitor 2004 Solid Waste, World Bank in Vietnam

Zurbrügg, C 2002, ‘Urban solid waste management in low-income countries of Asia - how to cope with the garbage crisis’, paper presented to: The Scientific Committee on Problems of the Environment (SCOPE): Urban Solid Waste Management Review Session, Durban, South Africa, November 2002, viewed 08 Oct 2018, https://www.eawag.ch/fileadmin/Domain1/Abteilungen/sandec/publikationen/SWM/General_Overview/Zurbruegg_2003_Crisis.pdf.

Published
2018-12-31
Section
Articles